Schaerer Junior - Changing Steaming Time

Operation
Page 4-20 BAJR_USA_EN_V03
Display message:
The coffee machine returns to normal operating mode.
Note:
The factory setting of 140 corresponds to a reference value of 140 ml. This value can
vary slightly depending on the water pressure in the mains supply.
4.6.4.3 Changing steaming time
The coffee machine is set to run in "Ready" mode and use the default settings
for routine operation.
Note:
Programming can be cancelled at any time by pressing the [ on/off ] button. All
settings that have been confirmed so far by pressing the [ M ] button are still va-
lid. The current value shown in the display is discarded and the original setting is
kept.
1. Press the [ M ] button.
Display message:
2. Press the [ STEAM ] button:
The display will show the current steaming time:
Display example (= factory setting):
Displayed value is the total of the selected product button.
"+0%" = 100%
3. Either press button [
] or [
] to increase or decrease the water quantity.
Display example
Pressing button [ M ] will accept the new value as 100% (e.g. 22.00s will be the
new 100% setting)
4. Press the [ M ] key to confirm the setting or modification.
Display message:
The coffee machine returns to normal operating mode.
Note:
The factory setting of 20.00s corresponds to a reference value of 20.00 seconds.
Ready
Product,+,C
+0% 20.00s
+10% 22.00s
Ready