Operation
BAJR_USA_EN_V03 Page 4-25
4.6.6.2 Clearing counter
You can delete the total of all product servings from the counter.
The coffee machine is set to run in "Ready" mode and uses the default settings
for routine operation.
Note:
Programming can be cancelled at any time by pressing the [ on/off ] button. All
settings that have been confirmed so far by pressing the [ M ] button are still va-
lid. The current value shown in the display is discarded and the original setting is
kept.
1. Press the [ M ] button.
2. Press the [ DECAF ] button:
Display example (=factory setting)
3. Enter the PIN code as described in 4.6.6.1 "Entering PIN code" on page 4-24.
4. Press the [ M ] button until the following menu appears:
Display example
5. Press the [
] button.
Display example: A total of 249 has been served.
Note:
Step 7. irrevocably deletes the current count.
Programming can be cancelled at any time by pressing the [ on/off ] button.
The current count will not be deleted. Press the [ on/off ] button again to switch
into "Ready" mode.
6. Press the [ M ] button to confirm the setting or modification.
7. * Select next menu: Press the [ M ] button.
8. * Return to normal operating mode: Press the [ M ] button, until "Ready" ap-
pears in the display.
4.6.6.3 Locking/unlocking buttons
The product buttons for each product can be locked and unlocked individually.
The coffee machine is set to run in "Ready" mode and uses the default settings
for routine operation.
Counter status
To Next Page
Loading...
Need help?
General
