Schaerer Junior User Manual

Operation
BAJR_USA_EN_V03 Page 4-19
10. Press the [ M ] key to confirm the setting or modification.
Display message:
The coffee machine returns to normal operating mode.
Note:
Water quantity:
The factory setting of 142 corresponds to a reference value of 140 ml. This value can
vary slightly depending on the water pressure in the mains supply.
Grinding amount:
The factory setting of 5.80 s (seconds) corresponds to a reference value of 9 grams.
This value can vary slightly depending on the type of coffee and degree of grinding.
Pre-brewing:
Pre-brewing means that the ground coffee in the brewing unit is subjected to a very
brief brewing process to make it swell up slightly. This ensures that the aromatic es-
sences that determine the final quality of the coffee product are released more effi-
ciently.
4.6.4.2 Changing hot water quantity
The coffee machine is set to run in "Ready" mode and use the default settings
for routine operation.
Note:
Programming can be cancelled at any time by pressing the [ on/off ] button. All
settings that have been confirmed so far by pressing the [ M ] button are still va-
lid. The current value shown in the display is discarded and the original setting is
kept.
1. Press the [ M ] button.
Display message:
2. Press the [ HOT WATER
The display will show the current water quantity:
] button:
Display example (= factory setting):
Displayed value is the total of the selected product button.
"+0%" = 100%
3. Either press button [
] or [
] to increase or decrease the water quantity.
Display example
Pressing button [ M ] will accept the new value as 100% (e.g. 153 will be the
new 100% setting)
4. Press the [ M ] key to confirm the setting or modification.
Ready
Product,+,C
+0% 140
+10% 153


Schaerer Junior Specifications

General

Brand	Schaerer
Model	Junior
Category	Coffee Maker
Language	English