Operation
Page 4-10 BAJR_USA_EN_V03
4.4.9 Dispensing hot water
Note:
Press the [ HOT WATER
] button for delivery of hot water. Delivery is facilitated
through the hot water pipe located to the right of the beverage outlet. (see Fig. 4.9 A)
- Hot water cannot be pre-selected.
- Coffee and hot water cannot be served simultaneously.
Danger!
Risk of injury by scalding! Keep hands and other body parts away from the out-
let!
Position an empty cup underneath the hot water
outlet (see fig. 4.9 A).
1. Press the [ HOT WATER
The following message is displayed:
] button.
2. * To abort the current delivery:
Press the [ HOT WATER
] button.
3. Remove the cup.
4. Remove the cup(s) only after the LED next to
the product button is off.
Note:
The default quantity for each product selection is approx. 140 ml. The quantity can be
adjusted individually: see 4.6.4.1 "Changing water and/or grinding quantities for coffee
products" page 4-17.
The water level can vary slightly with fluctuations in the mains water supply.
Hot water
To Next Page
Loading...
