Operation
BAJR_USA_EN_V03 Page 4-27
2. Press the [ DECAF ] button:
Display example (=factory setting)
Enter the PIN code as described in section 4.6.6.1 "Entering PIN code" on page
4-24.
3. Press the [ M ] button until the following menu appears:
Display example (=factory setting)
4. Either press button [
] or [
] to lock or unlock the descaling setting.
Adjustment range:
- ON / OFF
5. Press the [ M ] button to confirm the setting or modification.
6. * Select next menu: Press the [ M ] button.
7. * Return to normal operating mode: Press the [ M ] button, until "Ready" ap-
pears in the display.
4.6.6.5 PIN-Code for programming of "product buttons" ON / OFF
The PIN code for programming the product buttons (see 4.6.1 "Menu overview"
page4-16) can be protected against unauthorized access. This is done by using
the override PIN code: see 4.6.6.8 "Change PIN code" page 4-29.
The coffee machine is set to run in "Ready" mode and use the default settings
for routine operation.
Note:
Programming can be cancelled at any time by pressing the [ on/off ] button. All
settings that have been confirmed so far by pressing the [ M ] button are still va-
lid. The current value shown in the display is discarded and the original setting is
kept.
1. Press the [ M ] button.
2. Press the [ DECAF ] button:
Display example (=factory setting)
3. Enter the PIN code as described in section 4.6.6.1 "Entering PIN code" on page
4-24.
4. Press the [ M ] button until the following menu appears:
Display example (=factory setting)
5. Either press button [
] or [
] to switch off or switch on the PIN code.
Adjustment range:
- ON / OFF
Code 0000
Descaling ON
To Next Page
Loading...
