Operation
Page 4-12 BAJR_USA_EN_V03
Steam delivery ends as soon as a beverage
temperature of approx. 70°C (in the container)
is reached.
6. Place the container on a stable surface.
Danger!
The steam pipe is hot. Touch the steam pipe
only at the rubber handle.
7. Clean the outside of the steam pipe with a wet
and clean paper cloth.
8. Point the steam pipe towards the drip grid.
Press the [ STEAM ] button twice in short se-
quence to clean the inside of the steam pipe.
4.4.11 Setting of the grinders
The factory setting of the grinder is valid for most bean
types. You can however alter the degree of grinding
manually for each grinder.
Attention!
The degree of grinding should only be altered while
the grinder is running.
Change the setting of the grinder with the grinder turn-
ing handle (supplied) to the desired position.
Change the grind to fine = turn clockwise (a)
Change the grind to coarse = turn counter-clockwise
(b)
Position of the two Hexagonal see
chapter 3.1.4 " Grinder adjustment "
page 3-4.
To Next Page
Loading...
Need help?
General
