Cleaning
BAJR_USA_EN_V03 Page 5-5
5.3 Remove all ground coffee residue from the
side panels, the base and the brewing unit
with the supplied brush.
5.4 Clean the inside with a moist and clean pa-
per tissue...
5.5 ...and dry the cleaned surface with a clean
paper tissue.
6. Re-attach the front cover plate by inserting
it into the opening on the top and then pull-
ing it all the way down. Ensure that the front
panel is flush with the machine's front and
that it is securely fastened in the locking
position.
6.1 Attach the coffee outlet cup. Ensure that it
locks into place (a).
6.2 Push the coffee grounds container back into
the coffee grounds container slot.
Note:
As soon as the grounds container is inserted
the brewing unit will move back into its original
position.
The following message will now be displayed:
a a
To Next Page
Loading...
Need help?
General
