Safety and Functional Tester GLP2-i/e
During the test, test object and test leads must not be touched!
The safety measures required by law must be adhered to!
Schleich GmbH * D-58675 Hemer * 0049 / (0)2372 / 9498-0 * 0049 / (0)2372 / 9498-99 *
http://www.schleich.com * info@schleich.com 16
The operator is obliged to report any change at the testing device, that impairs the safety, immediately to
his superior (e.g. to the person in charge for measuring devices) or to Messrs. Schleich GmbH.
Unauthorized modifications and changes, which impair the safety of the testing device, are not allowed. All
work at the testing device must be done when it is voltage-free and switched-off.
Before commissioning and after maintenance/repairs it must be checked, whether all protection devices are
installed properly and functional. Protection devices must never be removed.
For the operation of the tester GLP2-i/e, please take particular note of the regional safety regulations and
regulations for the prevention of accidents.
To Next Page
Loading...