Safety and Functional Tester GLP2-i/e
During the test, test object and test leads must not be touched!
The safety measures required by law must be adhered to!
Schleich GmbH * D-58675 Hemer * 0049 / (0)2372 / 9498-0 * 0049 / (0)2372 / 9498-99 *
http://www.schleich.com * info@schleich.com 15
2.0 Safety
2.1 Safety symbol
You will find this symbol with all safety precautions and warnings in this operating manual where danger to
life and limb exists. Please follow these warnings and act particularly careful in these cases. All safety
precautions and warnings need to be passed on to other users. Apart from the information in this operating
manual, the generally valid safety and accident prevention regulations must be observed.
2.2 Attention
Attention!
You will find this Attention ! sign at places in this operating manual, which must be observed very carefully,
so that the guidelines, regulations and indications and the correct operating process, are observed. This is
also necessary to prevent that the testing device and/or other parts of the equipment are damaged or
destroyed.
2.3 Regulations for safety at work
The following regulations for safety at work are to be strictly adhered to:
The safety and function tester GLP2-i/e has been designed according to the latest developments in
technology and is operationally reliable. However, should unqualified personnel use this testing device, in
an inappropriate way or for improper use, this testing device can be dangerous.
Each person in the factory of the user that deals with the installation, the operation and the maintenance of
the testing device GLP2-i/e must have read and understood the complete operating manual and particularly
the information on safety. We recommend that the user has this confirmed in writing (see annex).
The safety and function tester GLP2-i/e serves for testing voltage-free test objects, only. Any use other
than that is not in accordance with the application of this device. Any damage resulting from improper use
will not be covered by the supplier/manufacturer. In such cases the user bears all risks.
It is also necessary to follow the installation-, operating- and maintenance/repair conditions specified by
the manufacturer/supplier.
The safety and function tester GLP2-i/e may only be operated, maintained and repaired by authorized,
trained and instructed personnel, which must have participated in a special training covering all possible
risks.
Upon any kind of work concerning commissioning, operation, repairs and maintenance, the switching-off
and switching-on procedures indicated in the operating manual must be considered.
Any working manner that impairs the safety of the testing device must be refrained from.
To Next Page
Loading...