Need help?Do you have a question about the Schleich GLP2-i/e and is the answer not in the manual?
Provides technical specifications for the testing device, covering voltage and fuse protection.
Details technical specifications for various electrical test methods supported by the device.
Defines the intended use and operational scope of the GLP2-i/e safety and function tester.
Outlines manufacturer liability limitations and user responsibilities for device operation.
Explains safety symbols and general safety precautions for manual usage.
Highlights important notices requiring careful attention to prevent damage or hazards.
Details mandatory safety regulations for installation, operation, and maintenance of the testing device.
Provides crucial safety information and guidelines for users of high-voltage testing equipment.
Introduces the operating manual and stresses understanding content for safe operation.
Specifies intended operational scope and technical data for the tester.
States copyright ownership of the manual and usage restrictions.
Explains tester capabilities for 2-pole/multi-pole testing and connection methods.
Outlines fundamental sequence of steps for executing a typical test process.
Identifies and describes operating elements and controls on the GLP2-i model.
Details operating elements and controls specific to the GLP2-e model.
Describes external devices and commands for safety, remote control, or faster operation.
Describes the main menu structure and options for accessing submenus.
Details input menu for entering text, like passwords, using an on-screen keyboard.
Shows testing menu interface displaying set values, actual values, and test results.
Explains device handling of confirmation prompts or inquiries, e.g., deleting programs.
Illustrates programming menu for changing set values and tester settings.
Displays initial device type/software version upon power-on, followed by a safety warning.
Guides user on selecting and loading test programs from the tester's database.
Explains counter function tracking passed ("go") and failed ("no go") tests.
Details various programming functions: test programs, set values, interfaces.
Covers loading, naming, storing, and deleting individual test programs.
Allows programming of set values for integrated test methods, supporting older tester compatibility.
Explains how to define the sequence of individual test steps within a test program.
Configures general device settings: self-test, probe usage, buzzer, display contrast.
Describes settings for COM ports, NetCom addresses, and baud rates for printer/PC communication.
Manages printer assignments and defines printout content like headers and protocol numbers.
Allows changing the device's access password for security and configuration protection.
Enables performing individual test methods for direct value observation and troubleshooting.
Highlights special features for AC high-voltage single tests: burning, pulse operation, ARC detection.
Displays general information about the tester: model, software version, hardware details.
Allows optional adjustment of the internal clock's time and date settings.
Explains how connection diagrams simplify programming via variables for output control.
Lists and explains status messages and error codes encountered during device operation.
Explains PE resistance test, its purpose for ground discharge checks, and fault detection.
Guides programming PE resistance test parameters: limit value, time, current, voltage.
Provides examples of manual and automatic test processes for the PE resistance test.
Describes insulation resistance test, its purpose, and measurement principles.
Explains function test, covering 1-phase/3-phase variants and their parameters.
Details leakage current test procedures, including EN60990 and EN60601 standards.
Covers substitute leakage current test, its explanation, and programming for GLP2-i/e.
Explains high-voltage test: AC/DC parameters, safety, and options like ARC detection.
Describes continuity test, its explanation, and programming options for GLP2-i/e.
Details resistance test: measuring ranges, accuracy, and 4-wire measurement capability.
Explains mathematical test function and its programming parameters.
Covers turn-to-turn tests: application at armatures and programming details.
Explains rotor test, its explanation, and programming specific to the rotor test.
Describes FI-Schutzschalter Prüfung (RCD test) and its programming.
General| Brand | Schleich |
|---|---|
| Model | GLP2-i/e |
| Category | Test Equipment |
| Language | English |
To Next Page