Safety and Functional Tester GLP2-i/e
During the test, test object and test leads must not be touched!
The safety measures required by law must be adhered to!
Schleich GmbH * D-58675 Hemer * 0049 / (0)2372 / 9498-0 * 0049 / (0)2372 / 9498-99 *
http://www.schleich.com * info@schleich.com 32
5.4 “go/no go counter”
go/no go counter
Total number of tests...: 3
go counter..............: 3
no go counter...........: 0
Average test period.....: 10sec
Average total time......: 12sec
ESC Print Delete
This counter menu indicates, how many tests have been performed. It is also indicated, how many tests
were “go” and how many were “no go”.
Average test time
This is the average test time of all test methods between the beginning and the end of the test (total of “go”
and “no go” counters in one test program.
Average total time
This is the average total time of all test methods between the beginning and the end of the test (total of
“go” and “no go” counters in one test program). This time comprises the test time and the setting-up time.
By pressing the button Delete , the counter can be set to zero. If a password is activated in the GLP2-i/e,
it will be required, here. If no password is activated, there will be a Yes/No inquiry.
If a printer is connected, the counter content and times can be printed out via the button Drucken .
To Next Page
Loading...