Schleich GLP2-i/e - Example of a Print-Out Without Definitions (Short); Example of a Print-Out with Definitions (Long)

Safety and Functional Tester GLP2-i/e
During the test, test object and test leads must not be touched!
The safety measures required by law must be adhered to!
Schleich GmbH * D-58675 Hemer * 0049 / (0)2372 / 9498-0 * 0049 / (0)2372 / 9498-99 *
http://www.schleich.com * info@schleich.com 58
5.5.6.1 Example of a print-out without definitions (short)
Protocol
----------
Lamp X564
Nr. 000005120
No test St.vl At.vl
1 PE 0.20 0.100 go
2 PE 0.20 0.100 go
3 PE 0.20 0.100 go
4 PE 0.20 0.100 go
5 ISO 2.0M >500M go
6 FCT 0.44A 0.436A iO
7 HV 3.0mA 0.1mA
1000V 1051V go
16.12.04 08:30:07
5.5.6.2 Example of a print-out with definitions (long)
Protocol
------------------------------------------------------------------
Name of program : Lamp X564
Protocol number : 000005120
No test Definitions St.vl At.vl
1 PE PE at rear panel 0.20 0.100 go
2 PE PE at front panel 0.20 0.100 go
3 PE PE at ballast 0.20 0.100 go
4 PE PE at middle sheet 0.20 0.100 go
5 ISO insulation test 2.0M >500M go
6 FCT current consumption 0.44A 0.435A go
7 HV high voltage at mains socket 3.0mA 0.1mA
1000V 1053V go
Date : 16.12.04 09:09:35