Schleich GLP2-i/e - Declaration of Conformity

Safety and Functional Tester GLP2-i/e
During the test, test object and test leads must not be touched!
The safety measures required by law must be adhered to!
Schleich GmbH * D-58675 Hemer * 0049 / (0)2372 / 9498-0 * 0049 / (0)2372 / 9498-99 *
http://www.schleich.com * info@schleich.com 6
Declaration of Conformity
The undersigned declare on behalf of
Schleich Antriebs- und Steuerungstechnik GmbH
An der Schleuse 11
D-58675 Hemer
That the tester
GLP2-i/e
to which this declaration relates
is in compliance with the below mentioned
EEC Directives (including all amendments)
73/23/EEC Low Voltage Directive
89/336/EEC Electromagnetic compatibility
98/37/EG | EN60204 Machinery Directive
and that following standards have been applied
EN61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use
EN61326-1 EMC requirements / Electrical equipment for measurement, control and laboratory use
Hemer, 6.6.2001
Dipl.Ing. M. Lahrmann Karl-Dieter Schleich
Geschäftsleitung Geschäftsleitung