Safety and Functional Tester GLP2-i/e
During the test, test object and test leads must not be touched!
The safety measures required by law must be adhered to!
Schleich GmbH * D-58675 Hemer * 0049 / (0)2372 / 9498-0 * 0049 / (0)2372 / 9498-99 *
http://www.schleich.com * info@schleich.com 54
actual value data
According to the Schleich software in use for remote control, you need to select, which data are to be
returned as actual value via the interface.
Standard protocol: The actual value and the set value is transmitted as result via the interface.
This settings needs to be selected for NetCom 60601, NetCom Multiuser and for
NetCom99.
extra results: The second actual value and the test time are additionally transmitted as result.
This settings needs to be selected for NetComXI and for PrintCom.
with definition: In addition, the definition of the test steps is transmitted as result. This setting can be
selected for PrintCom.
To Next Page
Loading...