SCW Sentry Pro - Chapter 6 Speed Dome Configuration; Configuring Local Parameters

To Next Page

To Previous Page

UserManualofIRNetworkSpeedDome



29

Chapter6 SpeedDomeConfiguration

6.1 ConfiguringLocalParameters

Note: The local configuration refers to the parameters of the  live view and other

operationsusingthewebbrowser.

Steps:

1. EntertheLocalConfigurationinterface:

Configuration>LocalConfiguration



Figure6Ͳ1 LocalConfigurationInterface



2. Configurethefollowingsettings:

z Live View Parameters: Set the protocol type, stream type, image size and live

viewperformance.

 ProtocolType:TCP,UDP,MULTICASTandHTTPareselectable.

TCP: Ensures complete delivery of streaming data and better video quality,

yettherealͲtimetransmissionwillbeaffected.

UDP:ProvidesrealͲtimeaudioandvideostreams.

HTTP: Allows the same quality as of TCP without setting specific ports for

streamingundersomenetworkenvironments.

MULTICAST:It’srecommendedtoselecttheprotocoltypeto 

whenusingtheMulticastfunction.ForotherinformationaboutMulticast,