SCW Sentry Pro - Configuring Tamper Proof Alarm

To Next Page

To Previous Page

UserManualofIRNetworkSpeedDome

57

6.6.7ConfiguringEmailSettingstosettheEmailparameters.

z UploadtoFTP

Capturetheimagewhenanalarmistriggeredanduploadthepicturetoa

FTPserver.

Note:YouneedaFTPserverandsetFTPparametersfirst.RefertoSection

6.3.8ConfiguringFTPSettingsforsettingFTPparameters.

z TriggerChannel

Recordavideowhenaneventoccurs.

Note:Youhavetosettherecordingscheduletorealizethisfunction.Please

refertoSection7.2ConfiguringRecordingScheduleforsettingsthe

recordingschedule.

z TriggerAlarmOutput

Triggeroneormoreexternalalarmoutputswhenaneventoccurs.

Note: To trigger an alarm output when an event occurs, please refer to

Section 6.6.5 Configuring Alarm Output to set the alarm output

parameters.



6.6.2 ConfiguringTamperͲproofAlarm

Purpose:

You can configure the speed dome to trigger the alarm actions when the lens is

covered.

Steps:

1. EntertheTamperͲproofSettingsinterface:

Configuration>AdvancedConfiguration>Events>TamperͲproof