SCW Sentry Pro - Configuring Network Settings; Configuring TCP;IP Settings

UserManualofIRNetworkSpeedDome
33

Figure6Ͳ6 DSTSettings

6.3 ConfiguringNetworkSettings
6.3.1 ConfiguringTCP/IPSettings
Purpose:
TCP /IPsettingsmustbeproperlyconfiguredbeforeyouoperat ethespeeddomeover
network.IPv4andIPv6arebothsupported.
Steps:
1. EnterTCP /IPSettingsinterface:
Configuration>BasicConfiguration>Network>TCP/IP
OrConfiguration>AdvancedConfiguration>Network>TCP/IP

Figure6Ͳ7 TCP/IPSettings