SCW Sentry Pro - Page 5

UserManualofIRNetworkSpeedDome
4
Cautions:
z Makesurethepowersupplyvoltageiscorrectbeforeusingtheproduct.
z Donotdroptheproductorsubjectittophysicalshock.Donotinstallthe product
onvibratorysurfaceorplaces.
z Donotexposeittohighelectromagneticradiatingenvironment.
z Do not aim the lens at the strong light such as sun or incandescent lamp. The
stronglightcancausefataldamagetotheproduct.
z Thesensormaybeburnedoutby alaserbeam,sowhen anylaserequipmentis
beingused,makesurethatthesurfaceofthesensornotbe
exposedtothelaser
beam.
z Do not place the product in extremely hot, cold temperatures (the operating
temperatureshouldbebetweenͲ30°C~65°C),dustyordampenvironment.
z To avoid heat accumulation, good ventilation is required for a proper operating
environment.
z Whileshipping,theproductshouldbepacked
initsoriginalpacking.
z Pleaseusetheprovidedglovewhenopenuptheproductcover.Donottouchthe
product cover with fingers directly, because the acidic sweat of the fingers may
erodethesurfacecoatingoftheproductcover.
z Please use a soft and dry cloth when clean inside and outside surfaces of the
productcover.Donotusealkalinedetergents.
