SCW Sentry Pro - Page 70

UserManualofIRNetworkSpeedDome
69
6.6.1ConfiguringMotionDetection.
 RecordTriggeredbyAlarm
IfyouselectAlarm,thevideowillberecordedwhenthealarmistriggered
viatheexternalalarminputchannels.
Besidesconfiguringtherecordingschedule,youhavetosettheAlarmType
and check the checkbox of Trigger Channel in the Linkage Method of
Alarm Input Settings interface. For detailed information, please refer to
Section6.6.4ConfiguringExternalAlarmInput.
 RecordTriggeredbyMotion&Alarm
IfyouselectMotion&Alarm,thevideowillberecordedwhenthemotion
andalarmaretriggeredatthesametime.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces.
PleaserefertoSection6.6.1andSection6.6.4fordetailedinformation.
 RecordTriggeredbyMotion|Alarm
IfyouselectMotion|Alarm,thevideowillberecordedwhentheexternal
alarmistriggeredorthemotionisdetected.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces.
PleaserefertoSection6.6.1andSection6.6.4fordetailedinformation.

Figure7Ͳ8 EditRecordSchedule

(3) Checkthecheckbox  andclick  tocopysettingsofthis
daytothewholeweek.Youcanalsocheckanyofthecheckboxesbeforethe