LCD
83
OSD Turn the on-screen display (OSD) ON/OFF.
The OSD appears regardless of setting if there is no input signal or the input is
out of range.
(Setting values: ON/OFF)
ON An OSD corresponding to the video input type (analog/digital) is always
displayed.
OFF Only shows the OSD when video input changes.
RESET Return the adjustment/setting values of BRIGHT, CONTRAST, SHARPNESS,
W/B, POSI, CLOCK, PHASE, MODE, and OSD to their factory default values.
(Setting values: YES/NO)
AUTO SETUP When performing auto setup, signal timing is determined automatically, and the
following items are adjusted to their optimum values, which are then saved.
- Sampling frequency/phase
- Horizontal/vertical screen position
(Setting values: ENTER/EXIT)
13
To Next Page
Loading...
