Sega UFO CATCHER - Page 73

66
OPTIONAL ITEMS
21
PHOTO 21-2d
3. Remove the 3 flange nuts on the inside of the bill
validator door, then remove the 3 carriage bolts from
the cabinet front side. Be careful not to drop or lose
the flange nuts.
PHOTO
21-2e
4. Set the coin security hook on the cabinet and secure it
in place with the 3 flange nuts that were removed.
5. Unlock with key and open the left bill validator door.
PHOTO
21-2f
6. Remove the 3 flange nuts on the inside of the bill
validator door, then remove the 3 carriage bolts from
the cabinet front side. Be careful not to drop or lose
the flange nuts.
CARRIGAGE BOLT (3), chrome
M6 x 20
FLANGE NUT (3)
M6 (Inside)
COIN SECURITY HOOK
CARRIGAGE BOLT (3), chrome
M6 x 20
FLANGE NUT (3)
M6 (Inside)