10C
17
English
4.2 Powering On and Off
Press the Jog Dial and the Phone Button at the same time to power on
or off the headset. To power on the headset, press the Jog Dial and the
Phone Button at the same time until the blue LED appears while
hearing the ascending beeps. To power off the headset, press the Jog
Dial and the Phone Button at the same time until the red LED appears
briey while hearing descending beeps.
4.3 Low Battery Warning
When the battery becomes low, you will hear a voice prompt, “Camera
off, battery low”. The camera function will shut down soon, but other
headset functions such as intercom will still be available for use. Then
when the battery becomes very low, the blinking blue LED in stand-by
mode turns to red and you will hear a voice prompt, “Low battery”.
The headset will automatically shut down soon after.
4.4 Charging
You can charge the headset by connecting the supplied USB power &
data cable into a computer’s USB port or USB wall charger. You can
use any standard micro-USB cable to charge the headset. You can
also charge the headset on the road using the cigarette charger. The
LED turns red while the headset is charging and turns blue when it is
fully charged. It takes about 3.5 hours to be completely charged.
4.5 Checking the Battery Level
You can check the battery level in two different ways when the headset
is powering on.
4.5.1 LED Indicator
When the headset is powering on, the red LED ashes rapidly
indicating the battery level.
4 ashes = High, 70~100%
3 ashes = Medium, 30~70%
2 ashes = Low, 0~30%
4.5.2 Voice Prompt Indicator
When you power on the headset, keep pressing the Jog Dial and the
Phone Button simultaneously for about 3 seconds until you hear high
tone triple beeps. Then you will hear a voice prompt indicating the
battery level is high, medium, or low.
Note:
If you pair the headset with an iPhone, you can check the headset’s battery
next to the Bluetooth icon on the phone’s screen.
To Next Page
Loading...
