10C
39
English
11 GROUP INTERCOM
Group Intercom allows you to instantly create a multi-way conference
intercom with three other most recently paired headsets.
1. Go through intercom pairing with up to three headsets you want to
have Group Intercom with.
2. Press the Jog Dial for 3 seconds to begin Group Intercom. The
LED will ash green and you will hear a voice prompt, “Group
intercom”.
3. To terminate Group Intercom, press the Jog Dial for 1 second
during Group Intercom. You will hear a voice prompt, “Group
intercom terminated”.
Note:
Group Intercom supports 10C, 10U, 10R, 10S and 20S only. Other headsets
will be excluded from Group Intercom.
12 UNIVERSAL INTERCOM
You can have an intercom conversation with non-Sena Bluetooth
headsets using the Universal Intercom function. Non-Sena Bluetooth
headsets can be connected to the Sena Bluetooth headset if they
support the Bluetooth Hands-Free Prole (HFP). The working distance
may differ depending on the performance of Bluetooth headset that it
is connected to. In general, it is shorter than normal intercom distance
since it uses the Bluetooth Hands-Free Prole. The Universal Intercom
affects both the phone call connection and the multipoint connection
(mostly used for GPS connections for riders). You cannot use a
multipoint connection device while you are using the Universal
Intercom in case as below.
To Next Page
Loading...
Need help?
General
