10C
36
9.2.2 Ending Three-way Intercom
You can completely terminate the conference intercom or just
disconnect an intercom connection with one of your active intercom
friends.
1. Press the Jog Dial for 1 second until you hear a beep to terminate
three-way conference intercom completely. It terminates both
intercom connections with (B) and (C).
2. Tap or double tap the Jog Dial to disconnect intercom connection
with one of the two intercom friends accordingly. For example,
by single tapping the Jog Dial, you can terminate the intercom
connection with just the rst intercom friend (B). However, you still
have the intercom connection with your second intercom friend
(C).
Jog Dial Operation Result
Press for 1” Disconnect (B) & (C)
Single tap Disconnect (B)
Double tap Disconnect (C)
End Three-way Intercom
9.3 Four-way Intercom
9.3.1 Starting Four-way Intercom
You can have four-way conference intercom with three other 10C users
by adding one more intercom participant to the three-way intercom.
While you are having a three-way intercom as above in
section 9.2,
a
new participant (D), who is an intercom friend of your intercom friend
(C), may join the conference intercom by making an intercom call to
your intercom friend (C). Please note that in this case, the new
participant (D) is an intercom friend of (C), not of you (A).
(B)
FirstFriend SecondFriend
You
(C)
(A)
Newparticipant
=intercomFriendof(C)
(D)
9.3.2 Ending Four-way Intercom
As same in the case of three-way intercom, you can completely get out
of the four-way conference intercom or just disconnect a single
intercom connection.
To Next Page
Loading...
Need help?
General
