10C
18
4.6 Volume Adjustment
You can easily adjust the volume by rotating the Jog Dial. You will hear
a beep when the volume reaches the maximum or minimum level. The
volume is set and maintained independently at different levels for
each audio source even when you reboot the headset. For example,
once you set the volume for mobile phone handsfree, it will not change
even if you adjust the volume for your Bluetooth MP3 music. However,
if you adjust the volume during stand-by mode, it will affect volume
levels of every audio source.
4.7 Sena Softwares
4.7.1 Sena Device Manager
The Sena Device Manager allows you to upgrade the rmware and
congure the device settings directly from your PC. Using this
software, you can assign speed dial presets, FM radio frequency
presets and more. It is available for both Windows and Mac. For more
information on downloading the Device Manager, please visit www.
sena.com.
4.7.2 Sena Smartphone App
The Sena Smartphone App allows you to congure device settings
and read the User’s Guide and the Quick Start Guide on your phone.
Pair your phone with your 10C headset (please refer to
section 6.1,
“Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device”
). Run
the Sena Smartphone App and you can congure its settings directly
from your smartphone. You can download the Sena Smartphone App
for Android or iPhone from www.sena.com/headset-app/.
Note:
To copy the files stored in the camera to your computer, make sure you turn
on the camera after connecting it via micro USB cable.
To Next Page
Loading...
Need help?
General
