10C
11
English
3.3 Installing the Microphone
3.3.1 Using the Attachable Boom Microphone
1. Peel off the cover of the hook and loop fastener for attachable
boom microphone to expose the adhesive tape. Then, attach the
fasteners on the inside surface of the left external shell.
Note:
1. The speaker with the shorter wire is for the left ear and the speaker with
the longer one is for the right ear.
2. If the helmet has deep ear pockets, you can use the speaker pads to
bring the speakers closer to your ears.
3. To enhance the audio quality, you can make use of the foam speaker
covers. Cover each speaker with the foam and attach the hook fastener
at the back of the speaker. Then place the speakers in the helmet as
described above. Foam covered speakers work most effectively when
they are slightly touching your ears.
Hook Fastener
Foam Speaker Cover
To Next Page
Loading...
Need help?
General
