Sena 10C - Configuration Settings; Headset Configuration Settings

10C
47
English
14 FUNCTION PRIORITY
The 10C operates in the following order of priority:
(highest) Mobile phone
Intercom
Music sharing by Bluetooth stereo music
FM radio
(lowest) Bluetooth stereo music
A lower priority function is always interrupted by a higher priority
function. For example, stereo music is interrupted by intercom call,
and an intercom conversation is interrupted by an incoming mobile
phone call.
15 CONFIGURATION SETTING
15.1 Headset Conguration Setting
You can set the conguration of the 10C by the voice menu instruction
described below.
1. To enter into voice conguration menu, press and hold the Jog
Dial for 10 seconds until the LED shows solid blue and you hear
high toned double beeps. You will also hear a voice prompt,
“Conguration menu”.
2. Rotate the Jog Dial clockwise or counter clockwise to navigate
between the menus. You will hear voice prompts for each menu
item as below.
3. You can enable the feature or execute the command by tapping
the Phone Button, or disable the feature by tapping the Jog Dial.
4. If any button is not pressed within 10 seconds, the 10C will exit
the conguration and go back to stand-by mode.
5. If you want to exit the conguration immediately, rotate the Jog
Dial until you hear a voice prompt, “Exit conguration”, and tap
the Phone Button.