Sena 10C User Manual

10C
63
English
19 OPERATION QUICK REFERENCE
Type Function Button Command LED Beep
Basic
Function
Power on
Press the Phone Button and
the Jog Dial for 1 second
Solid blue
Ascending
beeps
Power off
Press the Phone Button and
the Jog Dial
Solid red
Descending
beeps
Volume adjustment Rotate the Jog Dial - -
Camera
Function
Camera on Tap the Camera Button Solid green
High tone
double beeps
Camera off
Tap the Camera Button and
the Phone Button
Solid red
Mid tone
double beeps
Start/stop video
recording
Press the Camera Button for
1 second
Green
ashing
Mid tone
single beep
Take photo Tap the Camera Button
Green
ashing
-
Enter Video
Tagging mode
Press the Camera Button for
3 seconds
Green
ashing
-
Start Video
Tagging
Press the Camera Button for
1 second
Green
ashing
Mid tone
single beep
Exit Video
Tagging mode
Press the Camera Button for
3 seconds
Red ashing -
Type Function Button Command LED Beep
Mobile
Phone
Mobile phone
pairing
Press the Phone Button for
5 seconds
Blue & red
alternatively
ashing
High tone
multiple
beeps
Second mobile
phone pairing
Press the Jog Dial for
5 seconds
Red ashing
Multiple
beeps
Tap the Phone Button within 2 seconds
Call transfer
Press the Phone Button for
2 seconds
-
High tone
single beep
Answer & end
phone call
Tap the Phone Button or the
Jog Dial
- -
Voice dial Tap the Phone Button - -
Speed dial Double tap the Phone Button -
Mid-tone
single beep
Reject incoming
call
Press the Jog Dial for
2 seconds
- -
Intercom
Intercom pairing
Press the Jog Dial for
5 seconds
Red ashing
Mid-tone
single beep
Tap the Jog Dial of any one of the two headsets
Start/end each
intercom
Tap the Jog Dial - -
End all intercoms
Press the Jog Dial for
1 second
Blue ashing
Mid-tone
double beeps

Sena 10C Specifications

General

Intercom Range	Up to 1.6 km (1 mile) in open terrain
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Video Resolution	1080p: 30fps 720p: 60fps
Video Recording Time	2 hours
Card Support	MicroSD card up to 32 GB
Bluetooth Profiles	HFP, HSP, A2DP, AVRCP