10C
28
7 MOBILE PHONE, GPS, SR10
7.1 Mobile Phone Call Making and Answering
1. When you have an incoming call, simply tap the Phone Button or
the Jog Dial to answer the call.
2. You can also answer the incoming call by loudly speaking any
word of your choice if
Voice Activated Phone Answering
(VOX
Phone) is enabled, unless you are connected to intercom.
3. To end a call, tap the Phone Button or press the Jog Dial for
2 seconds until you hear a beep, or wait for the called person to
end the call.
4. To reject a call, press the Jog Dial for 2 seconds until you hear a
beep while the phone is ringing.
5. To transfer a call between the mobile phone and the headset
during the phone conversation, press the Phone Button for
2 seconds until you hear a beep.
5. The intercom pairing queue is ‘Last-Come, First-Served’. If a
headset has multiple paired headsets for intercom conversations,
the last paired headset is set as rst intercom friend. The
previous intercom friend becomes second intercom friend, and
third intercom friend.
Note:
For example, after the pairing procedures listed above, headset D is the
rst intercom friend
of headset A. Headset C is the
second intercom
friend
of headset A, and headset B is the
third intercom friend
of headset
A.
6.4.2 Pairing with Other Sena Headset Models for Intercom
Conversation
The 10C can be paired with all other Sena headset models such as the
20S, SMH10 and the SMH5 for intercom conversation. Please follow
the same procedure as above to pair with these headset models.
Note:
The SMH5 cannot participate in three-way or four-way conference intercom
with the 10C. The SMH5 has a limited capability of having two-way intercom
with other Sena headsets.
To Next Page
Loading...
Need help?
General
