Sena 10C - Page 27

10C
27
English
3. Simply tap the Jog Dial of any one of the two headsets A and B,
and wait until the LEDs of both headsets turn to blue and intercom
connection is automatically established. The two 10C headsets A
and B are paired with each other for intercom conversation. If the
pairing process is not completed within one minute, the 10C will
return to stand-by mode.
A
B
C
D
Pairing A & B
4. You can make other pairings between headsets A and C, and
between headsets A and D by following the same procedure as
above.
A
B
C
D
A
B
C
D
Pairing A & C Pairing A & D