10C
25
English
Note:
1. If you have two audio (A2DP) devices connected to your headset then
the audio from one device will interrupt the audio from the other device.
For example, if you are playing music from the primary mobile phone,
then it can be interrupted by playing music from the secondary mobile
phone and vice versa.
2. You have to use a motorcycle specific GPS, which transmits turn-by-turn
voice instructions to the headset by Bluetooth. Most automotive GPS
systems do not have this feature.
3. The Sena SR10 is a Bluetooth two-way radio adapter for group
communication, and uses Hands-Free-Profile. The incoming audio from
the two-way radio via SR10 is heard in the background while having an
intercom conversation or a mobile phone call.
4. The GPS navigation or a radar detector could be connected to the SR10
by wire. The GPS voice instruction or the radar detector alarm is also
heard in the background via SR10 while having an intercom conversation
or a phone call. Please refer to the SR10 User’s Guide for details.
6.3 Advanced Selective Pairing: A2DP Stereo or
Handsfree
When you are using a smartphone, sometimes you may need to
selectively use the 10C for A2DP stereo music only or for mobile phone
handsfree only. These instructions are for advanced users who want to
pair the 10C to their smartphones with only one selective prole: A2DP
for stereo music of HFP for phone calls.
If you have previously paired a mobile phone to the 10C, you must
clear the previous pairing list on both devices: the mobile phone and
the 10C. To clear the pairing list on the 10C, please do a factory reset
or follow the pairing list clearing procedure described in
section 18.4,
“Factory Reset”
or 15.1.10, “Delete All Bluetooth Pairing Information”
.
To clear the pairing list on the mobile phone, please refer to the
mobile
phone manual
. For most smartphones, delete the Sena 10C from the
list of Bluetooth devices in the settings menu.
To Next Page
Loading...
Need help?
General
