10C
41
English
12.2 Two-way Universal Intercom
You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as
you would between other Sena headsets. You may single tap the Jog
Dial to begin an intercom conversation with the rst intercom friend,
double tap with the second intercom friend, and triple tap with the
third intercom friend.
Non-Sena Bluetooth headsets may initiate the Universal Intercom
connection, activating the voice dialing or using the redialing
operation. You may also disconnect the existing connection by ending
a call operation function (refer to the
User’s manual of the headsets
for
voice dialing, redialing, and ending a call).
12.3 Three-way Universal Intercom
You may make a three-way Universal Intercom connection with two
10Cs and one non-Sena Bluetooth headset. If the intercom connection
is made, all headsets connected cannot use the mobile phone call
function since the connection between the headset and the phone is
disconnected temporarily. If you disconnect the intercom call, the
mobile phone connection is made again automatically so that you can
use a mobile phone call function.
1. You (A) need to be paired with a non-Sena Bluetooth headset
(B) and another 10C headset (C) for the three-way conference
intercom.
(A)
(B) (C)
Pairing
Pairing
To Next Page
Loading...
Need help?
General
