10C
67
English
• To prevent condensation from forming, put your product inside a
plastic bag and tightly seal it. Remove your product from the plastic
bag after the temperature inside the bag is similar to the external
temperature.
• Do not clean the product with cleaning solvents, toxic chemicals, or
strong detergents as this may damage the product.
• Do not paint the product. Paint may obstruct moving parts or interfere
with the normal operation of the product.
• Do not drop or otherwise shock the product. It may damage the
product or its internal electronic circuits.
• Do not disassemble, repair or modify the product as this may
damage the product and invalidate the product warranty.
• Do not store the product in humid environments, especially for long
time storage.
• Do not store the camera in proximity to magnetic elds. Doing so
may result in camera malfunction.
• Be careful to protect the lens by avoiding rough handling or physical
shock.
• Wipe the surface of the lens with a soft cloth in the following
situations:
(1) When there are ngerprints on the lens surface
(2) When the lens is used in hot or humid environments, such as
near oceans or rivers
• Store the product in a well-ventilated room to protect the lens from
dirt and dust.
• Never leave the product with the lens facing the direct sunlight.
Doing so may result in a re due to the sunlight being concentrated
by the lens.
Product Use
• When relevant, follow all regulations regarding the use of the camera.
(1) Do not use your camera in an aircraft, unless permitted.
(2) Turn off the camera when you are near medical equipment. Your
camera can cause interference with medical devices in hospital
or healthcare facilities.
• The camera generates a low level magnetic eld. Keep a safe
distance between the camera and cardiac pacemakers to avoid
potential interference. Turn off the camera immediately if your
camera indicates interference with a pacemaker and contact the
pacemaker manufacturer or a physician.
• Avoid interference with other electronic devices. Your camera
generates a low level magnetic eld that may interfere with unsealed
or improperly shielded electronic equipment in homes or vehicles.
Consult the manufacturers of your electronic devices to resolve any
interference problems you experience.
• In some regions, it is prohibited by law to ride motorcycles while
wearing headsets or earbuds. Therefore be certain to comply with all
relevant laws in the region before using the product.
To Next Page
Loading...
Need help?
General
