Sencore MRD 5800 - Page 101

MRD 5800 – User Manual
Page 101 (116)
Drive Level:
1.0 Vpp ±10%
Genlock Capability –
HD – Adjustment of pixels and lines. Max number of
dependent on video mode.
SD – Adjustment of subcarrier, pixels and lines.
Supported Genlock References:
NTSC Black Burst
PAL-B/G/I/D/M/N Black Burst
1080i x 1920 @ 25, 29.97 and 30fps
1080p x 1920 @ 23.97, 24, 25, 29.97, 30, 50, 59.94 and
60fps
720p x 1280 @ 50, 59.94 and 60fps
Video Decoding Features
General –
TS Data Rate:
.25-200 Mb/s
Video Decoder –
Video Profiles and Levels:
Base Unit –
MPEG-2 HP@HL (SD Only)
H.264 Hi422P@4.2 (SD Only)
H.264 Constrained BP@4.2 (SD Only)
HD 4:2:0 License (MRD 58710) Adds –
MPEG-2 HP@HL (HD Formats)
H.264 up to HP@4.2 (HD Formats)
HD 4:2:2 License (MRD 58720) Adds –
MPEG-2 422P@HL (All Formats)
H.264 Hi422P@4.2 (All Formats)
HEVC Decode Module (58265) and HEVC Decoding
license (58765) Adds-
HEVC Main and Main 10 Profiles up to Level 3, Main Tier
(SD only)
HEVC Decode Module (58265) and HEVC Decoding
license (58765) with HD 4:2:0 License (MRD 58710)
Adds-
HEVC Main and Main 10 Profiles up to Level 4, High Tier
(HD up to 1080p30 30Mbps and 1080p60 20Mbps)
HEVC Decode Module (58265) and HEVC Decoding
license (58765) with HD 4:2:2 License (MRD 58720)
Adds-
HEVC Main 4:2:2 10 profile up to Level 4, High Tier (HD
up to 1080p30 30Mbps and 1080p60 20Mbps)
Video Bit Rate:
MPEG-2 1-100Mb/s (dependent on profile)
H.264 CABAC Entropy coded 1 - 80Mb/s
CAVLC Entropy coded 1 - 100Mb/s
Video Formats:
Base Unit –
1080i x 1920 (16x9) @ 25, 29.97 and 30Hz
1080p x 1920 (16x9) @ 23.97, 24, 25, 29.97 and 30Hz
720p x 1280 (16x9) @ 50, 59.94, and 60Hz
576i x 720 (4x3 or 16x9) @ 25Hz
576i x 704 (4x3 or 16x9) @ 25hz