Sencore MRD 5800 - Page 105

MRD 5800 – User Manual
Page 105 (116)
BISS Descrambling Option
Compatibility Standard:
DVB-CSA
Supported Modes:
Base Unit – None
BISS Descrambling License (MRD58921) Adds –
Mode 1, Mode E, Injected ID
No limitation to number of services descrambled per key
Multi-BISS descrambling using up to 12 keys
Maximum TS bitrate:
200 Mb/s
IP Input/Output Module Option
General –
Connector:
2x 10/100/1000 auto negotiate Base-T RJ-45 Ethernet
Ports
Receive –
Input Format:
UDP, RTP and RTP with extension headers
Multicast and Unicast
CBR, VBR, Null Stripped
Receiver Capability:
2 simultaneous MPEG over IP transport streams
FEC Receive:
Pro MPEG CoP3 SMPTE2022
Range: L*D≤100
1≤L≤20
4≤D≤20
Annex B
Multicast Filtering:
Filters based on IP address
Buffer size:
1 - 4000 KB, or 1 – 4000ms, user configurable
Bitrate Range:
.25 – 200 Mb/s
Packets/IP Frame:
1-7 MPEG Packets/IP Frame
IGMP Compatibility:
Version 2 and 3
Transmit –
Output Format:
UDP and RTP
Bitrate Range:
.25 – 200 Mb/s
Packets/IP Frame:
1-7 MPEG Packets/IP Frame
Number of Outputs:
2 Mirrored TS – Unicast and/or Multicast
IP FEC Output (MRD58925) Adds –
FEC:
Columns, Columns/Rows
FEC Transmit:
Pro MPEG CoP3 SMPTE2022
Range: L*D≤100
1≤L≤20
4≤D≤20
DVB-S/S2 Input Module Option
General –
Frequency Range:
950 MHz – 2150 MHz
Number of inputs:
4 (A, B, C and D)
Connector:
F-81 Type, Female (4)
Impedance:
75 Ohms
Return Loss:
>9 dB
Separation:
>50 dB adjacent, >60 dB non-adjacent
RF frequency:
950 MHz to 2150 MHz in 100 kHz steps