Sencore MRD 5800 - Page 104

MRD 5800 – User Manual
Page 104 (116)
VII (SMPTE RP-186)
SDI HANC Data Types:
Time Code (SMPTE 12M-2)
VBI Waveforms (SDI/Composite):
Synchronization with video :
Line 21 Captions (CEA-608)
TVG2X, AMOL-48/96 (SCTE-127)
Teletext (EN300706)
WSS (EN300294)
VPS (EN300231))
Timecode in VBI (SMPTE 12M-1)
Frame Accurate
Video Overlay Support
Closed Caption Overlays:
CEA-608, CEA-708, or SCTE-20
DVB-Subtitle Overlays:
HD/SD with Auto Scaling (EN 300743)
ASI Input and Output Features
General –
Connector:
2x BNC, Female
Impedance:
75Ω
Return Loss:
≥15dB, 3.5 to 270 MHz
ASI Serial TS Input / Output –
Number of ASI Inputs:
1 or 2 (rev j or later)
Number of ASI Outputs:
1 (non loop-through) or 2 (rev j or later)
Standard:
EN50083-9 (V2:3/98) DVB ASI
Data Bit Rate:
270 Mb/s
Maximum TS Rate:
200 Mb/s
Minimum TS Rate:
250 Kb/s
Packet Sizes
Input:188 and 204 bytes
Output: 188 bytes
Modes Supported:
Burst, Byte and Inverted
DVB-CI Descrambling Module Option
CAM Decryption –
General –
Compatibility Standard:
DVB-CI EN 50221
Number of CAM Slots:
2
Auto CAM insertion/removal
detection:
Yes
CAM Usage:
Selectable, Enable/Disable
CAM Name Display:
Yes
Multicrypt Support:
Yes
Decryption Selection –
Elementary Stream types:
Video (MPEG2 & H264), Audio
Selection Modes:
Base Unit –
Decoded Elementary Streams
Multi-Service Descrambling License (MRD 58991) Adds
–
Individually selectable elementary streams
Maximum TS bitrate
DVB-CI – 100Mb/s
CAS Supported –
All major CA vendors supported