Sencore OmniHub 6 - Page 132

OmniHub 6/6D– User Manual
Page 132 of 182
SRT Receive Settings
Settings
Range
Description
Call Mode
Caller
Listener
Rendezvous
Defines the ‘handshake’ mechanism to be used
when establishing connection.
Remote Host
xxx.xxx.xxx.xxx
Defines the IP address of the stream on the
remote device
Remote Port
0-65535
Defines the port of the stream on the remote
devices
Local Port Mode
Auto
Manual
In Auto mode, the local port number will be
assigned automatically
In Manual mode, the local port number will be
defined by the user
Local Port
1-65535
Defines the local port number
Discovery Timeout
(seconds)
1 – 100, use 0 for infinite
Defines the length of time to wait for the stream
to be discovered
Latency (ms)
1-8000
Defines buffer size in milliseconds