Sencore OmniHub 6 - Page 141

OmniHub 6/6D– User Manual
Page 141 of 182
Local Port
1 – 65535
Defines the local port number
Discovery Time (seconds)
1 – 100, use 0 for infinite
Defines the length of time to wait for the
stream to be discovered
Latency (ms)
1 – 8000
Defines buffer size in milliseconds
Bandwidth Overhead (%)
0 – 50
Defines the amount of bandwidth overhead
to allow for
TS Packets Mode
Auto
Manual
In Auto mode, the source will define the
number of TS packets per SRT packet.
In Manual mode, the user will define the
number of TS packets per SRT packet
TS Packets per SRT Packet
1 – 7
Defines the number of TS packets per SRT
packet when mode is Manual
Time To Live (hops)
1 – 254
Defines the number of network devices the
transmission is allowed to pass through
Type of Service
0 – 255
Specifies the desired Quality of Service
(QoS). This value will be assigned to the
Type of Service field of the IP Header for
the outgoing stream.
Encryption Mode
Disabled
AES-128
AES-256
Defines which encryption standard to use or
if the DMG 7000 will automatically detect
this.
Passphrase
10 – 79 characters
Defines the encryption passphrase
Click the icon by the SRT input to view information about the incoming stream.
Clicking the icon will hide the SRT output statistics.
SRT Output Statistics