Sencore OmniHub 6 - Page 142

OmniHub 6/6D– User Manual
Page 142 of 182
The button is used to reset all the statistics for incoming
SRT packets and establish a new point of reference.
Zixi Output Settings
The figure below shows the options available when the “Transmit Type” is set to “Zixi”.
Zixi Output Settings
Settings
Range
Description
Remote Host
xxx.xxx.xxx.xxx
Domain Name
Defines the host of the remote broadcast
using an IP address or domain name
Alternate Remote Host
xxx.xxx.xxx.xxx
Domain Name
Defines the alternate host of the remote
broadcast using an IP address or domain
name
Remote Port
0 – 65535
Defines the port of the stream on the remote
device
Stream ID
User entry
Defines the Zixi stream ID to be transmitted
Password
User entry
Provides the password to allow specific