OmniHub 6/6D– User Manual
Page 157 of 182
To upload software updates to OHP-IP-00 module, click
this button. The user will be prompted to navigate to an
update file. The file will then upload to the module. When
completed, the module with prompt the user to either apply
the update or cancel
Delete the
Uploaded Software
Clicking this button prompts the user to confirm the deletion
of the software update from the OHP-IP-00 module. This
will also clear the Uploaded Version status of the Software
Versions section.
Update Software to
Uploaded Version
Clicking the button starts the software update process. The
OHP-IP-00 module will prompt the user to confirm the
update. Click Yes to continue or No to cancel.
Rollback Software Updates
The OHP-IP-00 module is capable of reverting back to a previous version of software
using the Rollback feature. The OHP-IP-00 accomplishes this by maintaining two
separate software images; one is the most current version of software with all current
settings and the other is the previous version of software with all of the previous
settings. To perform a rollback, click the Update Unit button and then click the Rollback
tab. The module will reboot after the rollback process is complete.
Reboot the Unit
To Next Page
Loading...
