SL MCR DW
105
Mounting the receiver on a stand
The thread in the middle of the mounting frame is suitable for
mounting on a standard microphone stand with boom arm and
3/8" thread.
▷ Screw the mounting frame onto the microphone stand as
shown.
▷ Insert the receiver into the mounting frame as shown until
you hear it click into place.
CAUTION
Danger from falling objects
If you mount the receiver improperly on the stand, the
stand and receiver may tip over. This can cause personal injury
and damage to property.
▷ Use a stand that is designed for a central load of 5 kg.
▷ Adjust the length of the boom arm as short as possible, as
shown in the figure.
▷ Set the height of the stand to a maximum of 2 meters.
▷ Make sure that the total weight of the stand and the mount-
ed receiver does not exceed 7 kg.
To Next Page
Loading...
