To Next PageTo Next Page
Need help?Do you have a question about the SENTRON PAC4200 and is the answer not in the manual?
General| Operating Temperature | -10°C to +55°C |
|---|---|
| Mounting | DIN rail |
| Display | LCD |
| Frequency Measurement Range | 45 to 65 Hz |
| Communication Interfaces | Modbus RTU, Ethernet |
| Rated Voltage | 690V |
| Measurement Category | CAT III 600V |
| Dimensions | 96 x 96 mm |
| Protection Class | IP65 (front), IP20 (terminals) |
| Measurement Type | Power, Energy, Voltage, Current, Frequency |
Details the comprehensive features of the SENTRON PAC4200, including measurement, counters, and interfaces.
Explains the load profile recording functionality, methods, and data access for power fluctuations.
Details the device's capabilities for evaluating network quality, including harmonics and unbalance.
Describes the device's limit monitoring capabilities, including definition and combination of limit values.
Explains the functions that can be assigned to the digital inputs and outputs of the device.
Describes the password protection feature for securing device settings against unauthorized access.
Details the procedure for inserting the battery, including safety precautions and polarity.
Provides steps and dimensions for mounting the device onto a switching panel.
Guides the user through the assembly process for installing expansion modules onto the device.
Outlines the procedure for safely removing the device from its installation.
Provides instructions for safely removing an expansion module from the SENTRON PAC.
Highlights critical safety instructions, including hazardous voltages and qualified personnel requirements.
Details the connection designations for screw terminals and ring lug terminals on the device.
Provides instructions for connecting cables to both screw and ring lug terminals.
Illustrates various connection examples for different system types and configurations.
Explains the importance and method of grounding the Ethernet cable for noise immunity.
Details the procedure for connecting the PAC RS485 expansion module to the RS 485 bus.
Guides on connecting the digital input/output expansion module, including wiring and assignments.
Outlines the sequential steps required to start up the device, from applying voltage to checking values.
Explains the procedure for applying the necessary supply voltage to operate the device.
Covers device parameterization, including connection type, voltage, current, language, and date/time settings.
Details the settings for date, time, time zone, and daylight saving time synchronization.
Explains how to set the connection type and voltage transducer parameters for accurate voltage measurement.
Covers parameterizing the operator interface by grouping settings like device information and basic parameters.
Lists all measured variables available via communication interfaces, including display and LIM source codes.
Explains the risks of electrostatic discharge to electronic components and necessary protective measures.
