SERES 5 - Parking

100 丨 Assistant Driving
Parking
Electronic Parking Brake
The Electronic Parking Brake (Electronic Parking Brake,
abbreviated as EPB), is integrated into the Park/Reverse
(P gear).
Activate the Electronic Parking Brake
Step on the brake pedal, bring the vehicle to a smooth
stop, and press the Parking button (P gear mode button)
to engage the parking brake.
* The image is for reference only; please refer to the actual
product
EPB Automatic Activation or Release
Automatic EPB Activation occurs when all of the
following conditions are met:
● The driver is not wearing the Front and Rear Seats
belt.
● The driver's side Vehicle door is open.
● The accelerator pedal is not pressed.
● The brake pedal is not pressed.
● The vehicle speed is less than 3 km/h.
Automatic EPB Release occurs when the following
condition is met:
● The main driver's door is closed.
● Step on the brake pedal.
● Shift to a position other than "Parking" (P gear) mode.
Tip
• In the event of a vehicle power failure, EPB cannot
be released.
• The parking brake is applied only to the rear
wheels and is independent of the vehicle's braking
system.
Automatic Parking
The Auto Hold function in the automatic parking system
assists in applying the brake to keep the vehicle stationary
when waiting at traffic lights or parking on slopes.
Activate or Deactivate the Automatic Parking
Navigate to Vehicle Setting > Driving Setting on the
central control screen to activate or deactivate automatic
parking.
* The image is for reference only; please refer to the actual
product
When the AUTO Hold function is activated, if the vehicle
remains stationary for an extended period, such as on a
slope, at traffic lights, or in stop-and-go traffic conditions,
AUTO Hold, meeting the activation conditions, will engage.
During this time, there is no need to press the brake pedal
or use the electronic parking brake.
Conditions for the Preparation and Operation of AUTO
Hold
Preparation Conditions for AUTO Hold
● When AUTO Hold is enabled, the indicator lamp " "
on the instrument display screen shows a gray
readiness status indicator.
● The driver's seat belt must be fastened, and the
Vehicle door must be closed.
● Completion of vehicle power-up.
Operating Conditions for AUTO Hold
● AUTO Hold has satisfied the preparation conditions.
● When the vehicle is in Driving gear(D Gear)/ Neutral
gear(N Gear), the driver steps on the brake pedal to
bring the vehicle to a stop.
Caution
If the AUTO Hold preparation conditions are not met,
Auto Hold will automatically disengage.
Tip
• AUTO Hold exits directly after 5 minutes of
operation, simultaneously activating the electronic
parking brake.
• Exiting automatic parking status can be achieved
by pressing the accelerator pedal, shifting to
Parking (P Gear), or activating the electronic
parking brake.
• When the AUTO Hold function is activated, the
vehicle's brake lights and high-mounted brake
lights illuminate, and the indicator light " " on
the instrument display screen turns green.
• During the activation period of AUTO Hold, if the
driver opens the Vehicle door or removes the seat
belt, the electronic parking brake will automatically
engage.