58 丨 Vehicle Controls
Nacelle Hood
You can open or close the nacelle hood using the following
method.
Open the nacelle hood
1. Pull the lower front nacelle hood opening handle
under the driver's instrument panel twice
consecutively. The nacelle hood will automatically
unlock and pop up to a certain height.
* The image is for reference only; please refer to the actual
product
2. Lift up the nacelle hood.
The nacelle hood can automatically rise when lifted
halfway at normal temperature. However, in low
temperatures, it needs to be manually lifted throughout
to the desired position, and it will maintain the partially
open position after releasing it
Close the nacelle hood
1. Lower the nacelle hood completely until it touches the
latch.
2. Place both hands in the area shown in the diagram
on the nacelle hood and press down firmly to fully
close the nacelle hood.
* The image is for reference only; please refer to the actual
product
3. Gently lift the front edge of the nacelle hood to ensure
it locks.
Before opening or closing the nacelle hood, check for
any obstacles in the opening or closing path to avoid
damaging the vehicle.
• Do not drive the vehicle when the nacelle hood is
not locked to prevent the possibility of it
unexpectedly opening during the driving process,
leading to accidents.
• When closing the nacelle hood, do not let it fall
freely, as this may prevent the nacelle hood from
closing properly or damage the vehicle.
When the nacelle hood is not locked, the instrument
display screen will indicate that the nacelle hood is not
closed.
To Next Page
Loading...
