Blind Spot Monitoring
Blind Spot Monitoring (Blind Spot Monitoring, abbreviated
as BSM), integrates with the lane change assistance
function. It operates through rear-corner millimeter-wave
radar to detect objects (such as Vehicles, trucks, bicycles,
pedestrians, etc.) appearing or rapidly approaching in the
driver's blind spot.
Function Overview
When BSD detects vehicles in the driver's blind spot on
both sides or when lane change assistant detects rapidly
approaching vehicles within 70 meters behind on both
sides, the indicator lights on the rearview mirrors are on. If
the driver continues to signal for a lane change, the
instrument display screen shows a warning prompt, and
the warning light on the corresponding side's external
rearview mirror remains on, accompanied by an audible
warning. This alerts the driver to the risk of collision.
* The image is for reference only; please refer to the actual
product
Activate or Deactivate BSD
Access the vehicle setting on the central control screen >
Assistant Driving, and activate or deactivate Blind Spot
Monitoring.
* The image is for reference only; please refer to the actual
product
Limitations of BSD
In the following situations (including but not limited to), the
functionality of BSD may be affected, and warnings may
not be issued:
● The Blind Spot Monitoring system may not detect
vehicles moving very slowly or relatively quickly.
● The Blind Spot Monitoring system may not detect
smaller objects such as motorcycles, electric bikes,
bicycles, pedestrians, etc.
● When driving on sharp turns, slopes, very wide or very
narrow lanes.
• Although the vehicle is equipped with BSD, to
ensure safe lane changes, it is advisable to check
the surroundings and confirm that there are no
dangers.
• BSD does not function during reverse maneuvers.
• As a driver, ensuring the safety of lane changes is
your responsibility.
• Even if the vehicle is equipped with lane change
assistant systems, it is important to pay attention
to surrounding vehicles before changing lanes for
safety.
• It is prohibited to attach any objects to the mirror
surface of the exterior rearview mirror to avoid
affecting the normal use of BSD.
• While the vehicle is in motion, when the vehicle
speed exceeds the target vehicle by 15 km/h, BSD
will not operate.
Door Open Warning
The Door Open Warning (Door Open Warning,
abbreviated as DOW) function operates through rear-
corner millimeter-wave radar to detect objects (such as
Vehicles, trucks, bicycles, pedestrians, etc.) on the
vehicle's side and rear side.
Function Overview
● When the vehicle is parked or moving at low speed
(speed ≤ 5 km/h), if a vehicle (bicycle, motorcycle,
Vehicle, etc.) or pedestrian approaches the vehicle
from behind and enters the warning area, and all four
doors are closed, the warning light on the outside
rearview mirror and the vehicle ambient light (red) will
on to alert the driver and passengers.
* The image is for reference only; please refer to the actual
product
● If, at this time, the driver or passenger opens the
corresponding side door, the warning light on the
outside rearview mirror and the vehicle ambient light
(red) on the corresponding side will flash.
Simultaneously, the buzzer will sound an audible
warning, alerting the driver or passenger of the
collision risk.
To Next Page
Loading...
