Introduction to Parking Assistant
The vehicle is equipped with Parking Assistant (APA)
functionality. When activated, the vehicle automatically
identifies nearby parking spaces. It prompts you to park
when the vehicle speed is below 25 km/h. The Parking
Assistant cannot be activated when the vehicle speed
exceeds 25 km/h. Activating Parking Assistant.
Activating Parking Assistant
You can activate the Parking Assistant in the following
ways:
● While in reverse gear, open the parking interface.
Click on the top-left corner Intelligent Parking
Assistant button on the central control screen to
activate the Parking Assistant.
● Lightly press the left side
of the steering wheel's
panoramic imaging button. Click on the top-left corner
Intelligent Parking Assistant button on the central
control screen to activate the Parking Assistant.
● Swipe down from the top of the central control screen
to access the quick menu. Click on the Assistant
Parking option to activate the Parking Assistant.
● As a driver, you should comply with relevant legal
requirements and take full responsibility for safe
parking.
● Even when the APA function is enabled, you
always have the responsibility to intervene when
necessary, gripping the steering wheel or applying
the brake actively.
● Please pay constant attention to the prompts on
the central control screen, and take control of the
vehicle when the APA function exits.
If any Parking Assistant system sensors fail, the
Parking Assistant function will not work.
• During APA function activation, only the APA
function interface can be operated. Other
interfaces on the central control screen (e.g.,
status bar or Climate controls control interface) will
not be displayed or operable.
• During the process of searching for a parking
space, ensure there is an appropriate distance
(approximately 0.5m to 2m) between the vehicle
and the vehicles or obstacles on both sides.
Otherwise, the Parking Assistant function may not
accurately recognize the parking space.
• The system supports three types of parking
spaces: horizontal parking, vertical parking, and
diagonal parking.
Parking Assistant
The vehicle is equipped with Parking Assistant function,
and when activated, the vehicle will automatically identify
and park in nearby parking spaces.
1. After activating the Parking Assistant parking, control
the vehicle to move slowly forward (speed less than
25 km/h) to search for a parking space. When a
parking space is identified, a blue or white parking
box will appear on the central control screen. Step on
the brake pedal to stop the vehicle, select the desired
parking space, and the "Start Parking" button will turn
blue.
* The image is for reference only; please refer to the actual
product
2. Step on the brake pedal, click on the "Start Parking"
switch to activate the Parking Assistant parking
function.
* The image is for reference only; please refer to the actual
product
3. The shaded small Vehicle in the image indicates the
next parking position for the vehicle. If you notice that
the shaded small Vehicle is positioned on other
obstacles and the vehicle has not stopped when it
approaches, be sure to take control of the vehicle
promptly.
* The image is for reference only; please refer to the actual
product
To Next Page
Loading...