SERES 5 - Exterior Lights

Vehicle Controls 丨 77
1
2
3
4
5
6
7
8
9
10
11
12
13
Exterior lights
Low beam lamp
During nighttime or low visibility conditions, the low beam
lamp provides illumination for vehicle driving.
Activate or deactivate the low beam lamp
●
Activate
: Rotate the light adjustment knob to the " "
position to light on the low beam lamp. The instrument
display screen will show the low beam lamp indicator
" " light on.
* The image is for reference only; please refer to the actual
product
●
Deactivate
: Rotate the light adjustment knob to the
"OFF" position to turn off the low beam lamp. The
instrument display screen will show the low beam
lamp indicator " " extinguished.
Activate or deactivate the high beam lamp
* The image is for reference only; please refer to the actual
product
●
Activate:
After turning on the low beam lamp, push
forward the light control lever to light on the high beam
lamp. The instrument display screen will show the
high beam lamp indicator " " light on. Pull the light
control lever back and release to flash the high beam
lamp once.
●
Deactivate:
In the high beam state, pull the light
control lever back to deactivate the high beam lamp.
The instrument display screen will show the high
beam lamp indicator " " extinguished.
Caution
For your safety and the safety of others during
oncoming traffic at night, please adjust the headlights to
low beam mode.
Tip
● High beams can only be activated when low
beams are on.
● Outside the Vehicle lights may fog due to
temperature and humidity changes. After driving
with the lights on for a while, the fog will dissipate.
If fog persists or worsens (water droplets, streaks),
please visit the dealership for inspection.
Activate or deactivate Intelligent Headlight Assistant
In the central control screen, enter Vehicle Setting >
overall setting >Lighting, and activate or deactivate
Intelligent Headlight Assistant.
* The image is for reference only; please refer to the actual
product
Intelligent switching function for low beam lamp: Rotate the
light adjustment knob to the AUTO position. When the
vehicle speed is > 40km/h, the system will automatically
switch between low beam lamp and high beam lamp
based on the current driving environment.
Tip
When rotating the light adjustment knob to the AUTO
position and the vehicle's low beam lamp is on but the
high beam lamp is not activated, the instrument display
screen will show the intelligent high beam lamp not
activated indicator " " light on. If the vehicle's high
beam lamp automatically turns on, the instrument
display screen will show the intelligent high beam lamp
indicator " " light on.
Headlight height adjustment
In the central control screen, enter Vehicle Setting >
overall setting >Lighting, and choose the appropriate
height for the low beam lamp according to your needs.