SERES 5 - Shifting

Assistant Driving 丨 93
1
2
3
4
5
6
7
8
9
10
11
12
13
Shifting
Gear
When the vehicle is in Parking mode, you must step on the
brake pedal and then push the Shifting lever forward or
backward to change the gear position.
* The image is for reference only; please refer to the actual
product
Reverse Gear (R Gear)
You must step on the brake pedal to engage reverse gear.
1. Step on the brake pedal until the vehicle comes to a
complete stop.
2. Hold the side button on the Shifting lever and push
the Shifting lever all the way forward to directly shift
to R gear. Alternatively, switch the current gear
position to Neutral gear(N Gear) and then push the
Shifting lever all the way forward. If the current gear
position is Neutral gear(N Gear), you can directly
push the Shifting lever all the way forward.
* The image is for reference only; please refer to the actual
product
3. Release the brake pedal; the vehicle will slowly
reverse.
Warning
When reversing, always pay attention to the
surrounding environment, make full use of the interior
rearview mirror, exterior rearview mirror, and panoramic
view to avoid accidents.
Neutral gear(N Gear)
You can shift to neutral using the following methods:
● When the vehicle is in Parking mode (P Gear), step on
the brake pedal, push the Shifting lever forward or pull
it back one position, and it will shift to neutral.
* The image is for reference only; please refer to the actual
product
● When the vehicle is in Drive mode (D Gear), step on
the brake pedal, push the Shifting lever forward one
position, and it will shift to neutral.
* The image is for reference only; please refer to the actual
product
● When the vehicle is in Reverse mode (R Gear), step
on the brake pedal, pull the Shifting lever back one
position, and it will shift to neutral.
* The image is for reference only; please refer to the actual
product
Warning
When using Neutral gear(N Gear), please use it in
conjunction with the brake pedal, or the vehicle may
roll.
Driving gear(D Gear)
Drive is the normal driving position.
1. Step on the brake pedal until the vehicle comes to a
complete stop.