156 丨 Charging and Refueling
Power supply to other electrical appliances outside
the Vehicle.
Through the slow-charging charging port and V2L
discharging gun, the vehicle can achieve the function of
mutual charging with loads, providing power to household
appliances such as lighting and low-power ovens, with a
maximum power of up to 3.3kW.
1. Bring the vehicle to a complete stop and shift the
gear position to Parking (P gear).
2. On the central control screen, go to Vehicle Setting >
Common Control, click the switch to open the
charging port cover.
* The image is for reference only; please refer to the actual
product
3. Remove the seal cover from the slow charging port.
* The image is for reference only; please refer to the actual
product
4. Press the button on the V2L discharging gun to
remove the protective cover.
5. Insert the V2L discharging gun correctly into the
vehicle's slow-charging charging port, and hear a
"click" sound to indicate that the discharging gun is
inserted in place.
* The image is for reference only; please refer to the actual
product
6. After inserting the V2L discharging gun, a prompt box
pops up on the central control screen. Click the
"Allow" switch on the prompt box to enable the
discharging function, and the vehicle starts supplying
power to the discharging gun plug.
7. After use, go to vehicle setting > energy management
on the central control screen, click the switch, and
end discharging.
* The image is for reference only; please refer to the actual
product
8. Press the button on the V2L discharging gun to
remove the discharging gun.
If the above methods cannot unplug the charging gun,
you can use the slow charging emergency pull rope to
unlock the charging gun (refer to page 155).
9. Close the seal cover of the slow charging port.
10. Close the charging port cover and press its rear part
until the charging port cover plate locks.
11. Put the V2L discharging gun back in place.
• Enter when the battery level is above 15%, and
automatically exit when the battery level is below
10%.
• Do not modify the V2L discharging port for use as
a "power station" for the household power grid to
avoid damaging the vehicle.
• When using this function, pay attention to the
battery level of the power battery and avoid
excessively low battery levels.
• In low-temperature environments, the charging
port cover may freeze, preventing it from popping
out. In such cases, thawing treatment should be
performed first.
• Vehicle power supply requires the use of a
dedicated discharging gun, which needs to be
purchased separately. For details, please consult
the dealer.
To Next Page
Loading...
