SERES 5 - Page 83

Vehicle Controls 丨 83
1
2
3
4
5
6
7
8
9
10
11
12
13
Front Windshield Wash
The purpose of front windshield washing is to use wiper
washer fluid to remove dirt from the front windshield,
preventing obstruction of the driver's visibility and
enhancing driving safety.
Activate Front Windshield Wash
* The image is for reference only; please refer to the actual
product
Pulling the wiper washer control lever backward will spray
wiper washer fluid onto the front windshield. Subsequently,
the front windshield wiper will move back and forth to wipe
the front windshield.
Caution
• Do not operate the wiper washer control lever
when the wiper washer fluid reservoir is low, as it
may cause the washer pump to overheat and
result in pump damage (see page 202 for details).
• Before the arrival of winter, please replace the
wiper washer fluid suitable for winter to prevent
freezing in low temperatures.
Tip
If you have installed nozzle heating, after the vehicle is
powered on, the system automatically controls the front
nozzle heating for 8 minutes when it detects that the
outside temperature is below -10 ℃. This prevents the
front windshield wash function from being unavailable in
cold weather. You can also turn on the nozzle heating
switch through the central control screen by clicking on
Vehicle Setting > overall setting > Others.
Rear Windshield Wash
The purpose of rear windshield washing is to use wiper
washer fluid to remove dirt from the rear windshield,
preventing obstruction of the driver's rear visibility and
enhancing driving safety.
Activate Rear Windshield Wash
* The image is for reference only; please refer to the actual
product
When the knob switch is turned to the " " position, the
rear windshield wiper wash is activated.
● When the rear windshield wiper function is activated,
rotating the knob on the wiper control lever upward will
spray washer fluid onto the rear windshield. Release
the knob to stop spraying.
● When the rear windshield wiper function is not
activated, rotating the knob on the wiper control lever
downward will spray washer fluid onto the rear
windshield. Subsequently, the rear windshield wiper
will move back and forth to wipe the rear windshield.
Release the knob to stop spraying, and the rear
windshield wiper will continue to move back and forth
twice before stopping.
Tip
When the rear windshield wiper wash function is
activated, the rear camera is also cleaned
simultaneously.